XFLY DRONE TİPİ LAZER TARAYICI

  • ÜRÜN BİLGİSİ
  • ÖZELLİKLER
  • VİDEO
  • DESTEK

Accurate & Reliable

XFLY series integrates high performance Inertial Navigation System with camera and LiDAR for point cloud generation.

Different customer’s need can be met by the choice of Hesai LiDAR XFLY120, XFLY300 or other sensors.

The processing platform contains a Wi-Fi interface, an embedded cellular modem for RTCM corrections, data logging software and a gigabit Ethernet network.

Equipped with a high-performance INS, it delivers clean point clouds even at high AGL.

As a small, lightweight and low-power system, it allows the user to fly longer, adapting to the needs of any project.

The post-processing software provides fully automatic point cloud generation.

 

200M AGL
Fly up to 200 meter above ground level.
ACCURACY
Thanks to high performances GPS-Aided INS, 3-5 cm point cloud accuracy can be achieved.
CAMERA
24 MP camera adds RGB information to the data. Camera comes to the customer already calibrated and with these boresighting values already saved onto the device.
FLY & DRIVE
Different mounts are offered to support the assembly onto well-known UAVs and other platforms, like cars.
Among the compatible UAVs: DJI M210 – M300 – M350 – M600, Inspired Flight IF1200 Hexacopter, Freefly Alta X, Freefly Astro, WISPR Ranger Pro 1100, Sony Airpeak S1
PPK/RTK DUAL/SINGLE GNSS
Depending on customer’s application, choose whether you want single or dual GNSS antenna. For who wants to avoid post processing, Real Time Kinematic solution is also available.